Specifications

Specifications are standard for all models unless otherwise stated within a given models listing.

**Ballast;

New RSL series 9 to 32 volt DC (standard in all models manufactured after January 1st 2010)

@ 12VDC 5.1 amp start load

              3.2 amp run load

              Cycle time 30 seconds

@24VDC 3.1 amp start load

             1.8 amp run load

             Cycle time 25 seconds

Original 9 to 32 volt DC ballast common from mid 2003 through 2009

@ 12VDC 9.5 amp start load

              3.2 amp run load

              Cycle time 45 seconds

@24VDC 6.5 amp start load

             1.8 amp run load

             Cycle time 35 seconds

Bulbs:

HID

D2S 4300 Kelvin

D2S 3200 Kelvin

Bulb Life 2500 to 3000 hours

**Halogen

H1 or H3 bulbs

12 volt 55 watt, 4.3 amp

12 volt 100 watt, 7.9 amp

24 volt 70 watt, 2.6 amp

Lens:

Borosilicate glass in most models. The 990, 968 and LED series use

Polycarbonate lens

Housings:

Cast Aluminum is standard in all HID and LED and well as several Halogen models.

Some Halogen models use stamped steel housings.

Some LED models use our new Proprietary thermal composite housing.

See indavidual listings.

Hardware:

Stainless Steel in 99% of all applications. Some hardware is zinc plated.

 

**Note: Specifications may vary based on voltage and available current in your system



Copyright © 2002-2016 ACRO Lights/BMR Product Sales. All rights reserved. All trademarks and material referenced are the property of ACRO Lights.